Stantest 2.8 Low-VOC

Alkyd Enamel Finish


High-performance quick-drying alkyd topcoat for interior and exterior applications that requires durability, low VOC and HAPs.


  • Low VOC and HAPs. 
  • Long-term exterior durability. 
  • High-performance pigment system for tinting. 
  • Quick drying. 
  • Interior/exterior applications. 
  • High gloss with good color retention. 
  • Can be catalyzed for improved performance


  • Recommended Use

    For industrial use and fabrication shop application. It can be used direct to metal or over a primer if more corrosion resistance is required.


  • Physical Constants

    Color/Shade code: White/1L080 (other colors available) 

    Finish: High gloss 

    Volume solids: 40% ± 1 

    Theoretical spreading rate: 642 ft²/US gallon [16 m²/liter] – 1 mils [25 microns] 

    Flash point: 72°F/22°C

    Specific gravity: 10.5 lbs/US gallon [1.26 kg/liter] 

    Viscosity: 25” – 35”, Zahn 3 

    Touch dry: 20 minutes, 68°F/20°C 

    VOC content: 336 g/liter [2.8 lbs/US gallon]

    The physical constants stated are nominal data according to the Hempel Group's approved formulas. VOC may be dependent on color. 


  • Application

    Application method: Airless spray / Air spray / Air-assisted airless / HVLP

    Thinner (max. vol.): Airless spray: Apply as packaged.

    Nozzle orifice: 0.011" – 0.015" (airless)

    Nozzle pressure:  2,000 psi [131 bar]

    Indicated film thickness, dry: 1.0 – 1.5 mils [25 – 38 microns]

    Indicated film thickness, wet: 2.5 – 3.7 mils [60 – 90 microns]

    For further Application Details, please refer to the Product Data Sheet available below.

  • Thinners, Additives and Reducers
    Hempel's Thinner 857US
    941JB Urethane Cure Agent